Inspection & Measuring: Your Advantages
Find out what is possible with ZOLLER for tool inspections. Process-related inspections or high-end analyses through to SKP, roughness and the creation of digital twins.
Learn more
Technical Specifications
Installation Weights
| »mμFocus« with »zep« sensor and under-table system | 250 kg |
| »mμFocus« with »zep-R« sensor and under-table system | 270 kg |
| »mμFocus« with »zep« sensor without under-table system | 75 kg |
»zep« Sensor for Measurement of Cutting Edge Geometry
| Z-axis | 300 mm |
| AA (describes the minimum distance between the lens and the measurement object) | Stripe projection 3 |
| Measurement principle | 0 mm |
| Smallest measurable radius | 3 μm |
| Numerical aperture | – |
»zep-R« sensor for measurement of 3D cutting edge geometry and surface roughness
| Z-axis | 300 mm |
| AA | 20 mm |
| Measurement principle | Confocal microscope |
| Smallest measurable radius | 3 μm (values for 20x objective; values for 50x objective: 1.4 μm) |
| Numerical aperture | 0.42 mm |
Profile Roughness: Selection of Measurable Parameters According to ISO 4287 and ISO 13565
| Ra | arithmetic mean over the entire measurement length |
| Rq | root mean square |
| Rt | total height of the roughness profile |
| Rmax | maximum height of the roughness profile within a single measurement section |
| Rz | average height of the roughness profile |
| Rp | Height of the highest peak in the roughness profile |
| Rv | Depth of the lowest valley in the roughness profile |
| Rk | Core roughness depth, height of the core region |
| Rpk | Reduced peak height |
| Rvk | Reduced valley depth |
| Mr1 | Material portion above the core region (Abbott curve) |
| Mr2 | Load-bearing material portion (Abbott curve) |
| Rsm | Mean width of profile elements |
| RPc | Peak count value |
Surface Roughness: Selection of Measurable Parameters According to ISO 25178-2 and ISO 16610
| Sa | Arithmetic mean height of the scale-limited surface |
| Sq | Root mean square height of the scale-limited surface |
| Sp | Maximum peak height of the scale-limited surface |
| Sv | Maximum pit height of the scale-limited surface |
| Sz | Maximum height of the scale-limited surface |
| S10z | Ten-point height of the surface |
| Ssk | Skewness of the scale-limited surface |
| Sku | Kurtosis of the scale-limited surface |
| Sdq | Root mean square gradient of the scale-limited surface |
| Sdr | Developed interfacial area ratio of a scale-limited surface |
| FLT | Flatness |
| Sk | Core height |
| Spk | Reduced peak height |
| Svk | Reduced valley depth |
| Smr1 | Material portion of peaks |
| Smr2 | Material portion of valleys |
| Vmc | Core material volume of a scale-limited surface |
| Vmp | Peak material volume of a scale-limited surface |
| Vvc | Void volume of the core of a scale-limited surface |
| Vvv | Void volume of the valleys of a scale-limited surface |
| Sxp | Extreme peak height |
| Str | Aspect ratio of the surface texture |
